HCTT-50kV/10kVA Test Transformer

Mode: HCTT 50KV/10KVA
Cylinder type                                                                               Rated output current: 0.2A
Single phase                                                                                 Cooling methods: ONAN
Frequency: 50Hz                                                                         No-load current ≤10%
Rated Capacity: 10kVA                                                               Waveform deviation ≤5%
Rated output voltage: 50kV                                                       Impedance voltage ≤5%
PD Level: <5pC at 100%UH of complete test system

Working for 60 minutes allowed at 100% rated current & voltage, rest 60 minutes. 4cycle each day.
Temperature rise of transformer winding is less than 65K, temperature rise of oil surface is less than 55K.
Dimension:Dia. φ200/φ250×500mm
Weight: <40kg

Transformer Oil: 
25# transformer oil is from Karamay Refinery. The oil indicator can reach the oil level for 500KV transformers. Factory test of test transformer should use new transformer oil supplying with transformers and perform oil inspection before or after factory test. Oil inspection report should be provided when the transformer delivered filled with oil. Quality of transformer oil should meet the requirements of SH0040-91, GB2536-90, GB7595-87, SD187-86, Class II A of IEC-296 standards. Components PCB are prohibited in the oil. When doing acceptance test on-site, the oil performance should satisfy the following requirements: DGA analysis of total hydrocarbons less than 10 mg/L, the breakdown voltage of the oil should not be less than 65kV/2.5mm, dielectric loss(90°C) is not more than 0.3%, water content is not more than 10mg/L, the gas content is not more than 1%.

Principle Diagram: