HCR 3x100KVA-0.6KV Compensation Reactor

Mode: HCR 3x100KVA-0.6KV
1) Structure: Iron shell, stationary type iron core
2) Rated capacitance: 300kVar
3) Rated frequency: 50Hz
4) Single phase
5) Rated voltage: 0.6kV voltage winding can be parallel connection or serial connection using.
6) Rated current: compensation current output: 166.6A 333.3A, 500A                   
7) Degree of linearity: <±1%
8) Sound level: <70dB  (measured in 4 meters distance)                                        
9) Over-current capacity: the over-current will not cause thermal damage or winding distortion to the compensation reactor,when the reactor working under 120% In continuous 5minutes.
10) Over-voltage capacity: the over-voltage will not cause any insulation damage of the compensation reactor when the reactor working under 110%UH 5minutes.
11) Working time: working under 100%UH continuous 60 minutes; Temperature rising ≤65K, oil surface temperature raise ≤55K;

  
Attention: 
1) The winding is mutistrand copper wire parallel wound, which reducing reactor winding eddy-current loss.
Copper wire density ≤2.5A/mm2
2) Partial discharge measurement: PD ≤3pC under 100% UH
3) Insulation level: all insulation, all terminal insulation withstand to ground 5kV/min, no abnormal discharge.
4) Structure: adjustable reactor iron coil pass through single phase motor, which realize stepless reactance regulation.
At the same time, we will equip moisture absorber and oil drain valve for the reactor.     

Principle Diagram: