≤600KVA Range
HCR 3x50KVA-0.6KV Compensation Reactor
Home > Systems > AC Dielectric Test > Compensation Reactor > ≤600KVA Range

HCR 3x50KVA-0.6KV Compensation Reactor

Lead time: 45 days

Mode: HCR 3x50KVA-0.6KV
1) Rated capacitance: 150kVar
2) Rated frequency: 60Hz
3) Single phase
4) Rated voltage: 0.6kV
5) Rated current: compensation current output: 125A~375A
6)There are compensation current transformer (200:5), installing inside
7) Impedance voltage ≤10%
8) Voltage Ratio of Measurement Winding: 1000:1
9) Over Current Ability: Continuous working for 10 minutes under 120% rated current, then thermal damage or distortion of the winding shall not be occurred.
10) Over Voltage Ability: Over voltage at 110% UH (220kV) for 10min.Then it shall not happen any insulation damage for the testing transformer.
11) Insulation Level: 5kV/1min (low voltage terminal to earth)
12) Partial discharge level: ≤10pC

HCR 3x50KVA-0.6KV Compensation Reactor, AC Dielectric Test System HCR 3x50KVA-0.6KV Compensation Reactor, AC Dielectric Test System

HCR 3x50KVA-0.6KV Compensation Reactor, AC Dielectric Test System HCR 3x50KVA-0.6KV Compensation Reactor, AC Dielectric Test System
Principle Diagram: 

  
Where To Buy