GTS-2010 Control System

Mode: GTS-2010
Main controlled object: resonant system, protection, peak voltmeter’s voltage measuring and other software system.
Function requirement: when flashover happened, HV will be cut off automatic. The voltage rising time can be set manual or automatic.
When in automatic mode, user can set the voltage rising time according to the voltage rising curve. System equips external pitch point protection. Output voltage is continuous adjusted. External set safety circuit pitch point, when pitch point open circuit, HV auto cut off. Control panel has system error display (Gas pressure value, short-circuit), system can not raise voltage when necessary. On voltage rising speed, there are two grades: fast and slow, which enable user control the voltage raising speed.
Control circuit voltage: 220V/380V/AC60Hz
Control console equip with over-voltage/over-current protection, voltage regulator auto aero and low gas pressure latch-up protection.
Control console equips withstanding timing, alarm bells, electric interlock function include low gas pressure latch-up protection.
With low/high voltage side voltage/ current display function and quality factor display
Has error display function
Main component are imported.
When flashover happens on the test object, the test system will not generate over-voltage.
Indoor use; stationary type.

Principle Diagram: