Tank Type
HTRS100kV/1000kVA(50kV,30kV) Inductance Resonant Reactor
Home > Systems > Inductance Resonant > Inductance Resonant Reactor > Tank Type

HTRS 100kV/1000kVA (50kV,30kV) Inductance Resonant Reactor

Lead time: 100 days

Mode: HTRS100kV/1000kVA(50kV,30kV)
Rated frequency:50Hz  Single phase
Cooling:ONAN  Rated capacitance:1000kVar
Rated voltage: 100, 50, 30kV
Rated current: 10, 20, 33.3A
Inductance adjusting( 15:1)and Capacitor load adjusting range
100kV/10A: 31.8 corresponding load0.051μF------0.318μF
50kV/20A : 7.95Hcorresponding load1.27μF
30kV/33.3A : 2.868Hcorresponding load3.53μF
Noise level : ≤75dB
Insulation level: 1.1times rated voltage 5min
Insulation mode:25# transformer oil
Duty cycle: Under 100% rated capacitance ,1hour on ,1hour off .Every day 8 cycles .
Winding temperature raise not surpass 65K, oil temperature raise less than 45K
Quality factor: Q≥45  Harmonic distoration: ≤1%
Adjust Inductance mode:electric stepless adjustable
Electric tap change convert voltage  Cooling: ONAN 
External structure:
① Housing is tank type, and connected with flange at two terminals, resistant to impact, low leakage current and partial discharge, external color is sky blue.
② Withstand 20kPa atmosphere sealing test, no leakage, no permanent deformation.
③ Sealing ring is acrylate material for aviations, oil resistance and thermo stability.
Transmission component structure:
①Adopt good material, use 1Ni18T9 stainless steel, which can't transmit magnet, as guide rail.
②In order to reduce the noise, adopt 1Ni18T9 stainless steel, which can't transmit magnet, double lead screw to drag the flexible iron coil.

HTRS 100kV/1000kVA Inductance Resonant HTRS 100kV/1000kVA Inductance Resonant

HTRS 100kV/1000kVA Inductance Resonant HTRS 100kV/1000kVA Inductance Resonant

Principle Diagram: 

  
Where To Buy

Related produtcs

Related Photos

Related Researches