HTRS 100kV/1800kVA (60kV) Inductance Resonant Reactor

Mode: HTRS100kV/1800kVA(60kV)
Rated frequency: 60Hz  Single phase
Cooling:ONAN  Rated capacitance:1800kVar
Rated voltage: 100, 60kV  Rated current: 18, 30A
Inductance adjusting( 15:1)and Capacitor load adjusting range
100kV/18A:14.737H corresponding load 0.048～0.478μf 
60kV/30A : 5.3H corresponding load0.16～1.327μf
Insulation level: 1.1times rated voltage 1min
Insulation method:25# transformer oil
Load cycle:Under 100% rated capacity ,1hour on,1hour off ,every day 4 cycles
Winding temperature raise not surpass 65K, oil temperature raise less than 45K
Quality factor: Q≥30  Harmonic distoration: ≤1%
Adjust Inductance mode:electric stepless adjustable
Electric tap change convert voltage  Cooling: ONAN
Structure: iron coil structure, user can change the reactance through adjusting open coil gaps, two epoxy tube,the steel bracket is made of stainless material in case of the reducing of quality factor which caused by eddyloss; pedestal has considered the heat which is caused by high‐intensity magnetic field; the resonant system designation has considered the expand with heat and contract with cold of the oil.
External structure:
1 Housing is tank type, and connected with flange at two terminals, resistant to impact, low leakage current and partial discharge, external color is sky blue.
2 Withstand 20kPa atmosphere sealing test, no leakage, no permanent deformation.
3 Sealing ring is acrylate material for aviations, oil resistance and thermo stability.
Transmission component structure:
①Adopt good material, use 1Ni18T9 stainless steel, which can't transmit magnet, as guide rail.
②In order to reduce the noise, adopt 1Ni18T9 stainless steel, which can't transmit magnet, double lead screw to drag the flexible iron coil.

Principle Diagram: