HTRS 60kV/775kVA (20kV,40kV) Inductance Resonant Reactor

Mode: HTRS60kV/775kVA(20kV,40kV)
Rated frequency:50Hz  Single phase
Cooling:ONAN  Rated capacitance:775kVar
Rated voltage: 20, 40, 60kV  Rated current: 38.75, 19.375, 12.9A
Tap 1: 20kV
Inductance adjusting range:32.86～1.643H
Capacitor load adjusting range:0.3086～6.173μF
Tap 1: 40kV
Inductance adjusting range:131.48～6.574H
Capacitor load adjusting range:0.07714～1.543μF
Tap 1: 40kV
Inductance adjusting range:296.2～14.81H
Capacitor load adjusting range:0.03424～0.6848μF
Waveform deviation factor: ≤1%  Quality factor: Q≥40
Noise level : ≤75dB
Working time : One hour on ,one hour off ,every day 8 cycles ,under 100%rated voltage and current .
Winding temperature raise not surpass 65K, oil temperature raise less than 55K
Structure: iron coil structure, user can change the reactance through adjusting open coil gaps, two epoxy tube, the steel bracket is made of stainless material in case of the reducing of quality factor which caused by eddy loss; pedestal has considered the heat which is caused by high‐intensity magnetic field; the resonant system designation has considered the expand with heat and contract with cold of the oil.
External structure:
1 Housing is tank type, and connected with flange at two terminals, resistant to impact, low leakage current and partial discharge, external color is sky blue.
2 Withstand 20kPa atmosphere sealing test, no leakage, no permanent deformation.
3 Sealing ring is acrylate material for aviations, oil resistance and thermo stability.
Transmission component structure:
①Adopt good material, use 1Ni18T9 stainless steel, which can't transmit magnet, as guide rail.
②In order to reduce the noise, adopt 1Ni18T9 stainless steel, which can't transmit magnet, double lead screw to drag the flexible iron coil.

 
Principle Diagram: